Product Description
Back in stock!
These are a great option for moving or upgrading your shock mounts. Eliminate the low hanging GM shock brackets! These brackets are all 1/4" thick where the stock brackets are only half as thick.
This set is designed with a 10 degree kicked in angle to position your shocks towards the center of the body made to fit the 3.25" tube diameter but can be used for any tube diameter from 3"-3.5" with some fine tuning. They are sold in pairs and should be welded on by a competent welder with the correct equipment.
- 1/4" thick
- 1/2" bolt hole
- 3 1/4" diameter tube
- 1 1/2" ID
- Sold in pairs
NOTE: Please specify in the notes if you intend to mount these on opposite sides of the axle or the same side. For example, if one is on the forward side and one on the back, you will need 2 of the same brackets. If mounting both on the same side of the axle tube, you will need opposing (mirror images) so that they angle the correct direction.
